Best selling
Turnigy TG9z 9g / 1.7kg / 0.12sec Eco Micro Servo
Spec.
Dimension: 23x12.1x21.4mm
Torque: 1.5kg/cm (4.8V), 1.7kg/cm (6.0V)
Operating speed: 0.13sec/60 degree (4.8V), 0.12sec/60 degree (6.0V)
Operating voltage: 4.8~6.0V
Temperature range: -20-60C
Dead band-width: 8us
Important.
The TG9 does not have the same strength and longevity as the HXT900.
Please ensure your control surfaces are bind-free and always check servos after a hard landing or crash!
Hobby King 30A ESC 3A UBEC
Specs:
Constant Current: 30A
Burst Current: 40A
Battery: 2-4S Lipoly / 5-12s NiXX
BEC: 5v / 3A
Motor Type: Sensorless Brushless
Size: 54 x 26 11mm
Weight: 32g
Programming Functions:
Battery Type: Lipo /NiXX
Brake: On / Off
Voltage Protection: Low / Mid / High
Protection mode: Reduce power / Cut off power
Timing: Auto / High / Low
Startup: Fast / Normal / Soft
PWM Frequency: 8k / 16k
Helicopter mode: Off / 5sec / 15sec (Start up delay)
Nylon Blue XT60 Connectors Male/Female (5 pairs) GENUINE
Excellent T-connector replacements.
Made from high-temp Blue Nylon and gold plated spring connectors, both included in the injection mould at the time when forming the connector. The XT60 ensures a solid high-amp connection, perfect for applications up to and beyond 65A constant.
XT60, Designed by hexTronik to be more reliable and a better quality connection than T-Connectors.
There is no patent on the XT60 connector, we hope this product is sold everywhere in the world and dominates the market, reducing customers dependency on the over-priced Deans T-connector.
Say 'No' to the Deans Connector profiteers, and use XT-60's!
IMPORTANT: "These are not cheap copied XT60 plugs. These original Nylon XT60 plugs, manufactured by AMASS, can handle over 60A current for extended periods without exceeding 80DegC thanks to their better contact surface area. The plug is also less likely to deform or melt in comparison to copied non-Nylon XT60 plugs."
Genuine Nylon high-temp XT60 connectors.
XT = heXTronik.
60 = 60A constant.
We're the guys that designed this plug! Now in Blue!
D2826-10 1400kv Brushless Motor
Specs:
Rpm/V: 1400kv
Shaft: 3.17mm
Voltage: 2S~3S (7.4v to 11.1v)
Weight: 50g
Watts: 205w
Max Current: 21A
ESC: 40A
Suggested Prop: 7x4(3S) ~ 9x4.7 (2S)
Mounting Hole Bolt Circle: 16mm or 19mm
NTM Prop Drive 28 Series Accessory Pack
Standard accessory pack for NTM Prop Drive 28 series motors.
CNC Machined (take a close look at the cross mount, even that is machined rather than punched) from billet 6061 alloy for strength and balance.
The propeller adapter is a press fit to ensure balance.
Specs:
Shaft Diameter: 5mm
Shaft Length: 19mm
Cross Plate Bolt Holes: 34mm
Weight: 13.8g (Total)
Glass Fiber Cloth 450x1000mm 18g/m2 (Super Thin)
100% woven glass fiber sheet.
Excellent for repairing or forming your own canopy, cowl or pretty much anything. Use epoxy resin, Araldite, or 2 part glue to form and set the sheet.
Create that perfect battery tray, repair your foamie to bulletproof status or even make servo and motor mounts!
Glass fibre cloth comes in a single sheet 1000mm x 450mm
Weight: 18g/m2
D2826-6 2200kv Outrunner Motor
Specs.
Voltage: 2S~3S (7.4v to 11.1v)
Weight: 50g&
Watts: 342w
Max Current: 34A
ESC: 40A
Suggested Prop: 7x4(2S) ~ 5x5 (3S)
Mounting Hole Bolt Circle: 16mm or 19mm
Turnigy Heat Shrink Tube 5mm Red (1m)
Turnigy Heat Shrink Tube 5mm Red (1m)
Turnigy D2836/8 1100KV Brushless Outrunner Motor
Spec.
Battery: 2~4 Cell /7.4~14.8V
RPM: 1100kv
Max current: 18A
No load current: 1A
Max power: 336W
Internal resistance: 0.107 ohm
Weight: 70g (including connectors)
Diameter of shaft: 4mm
Dimensions: 28x36m
Prop size: 7.4V/11x7 14.85V/7x3
Max thrust: 1130g
HobbyKing 40A ESC 4A UBEC
Specs:
Constant Current: 40A
Burst Current: 60A
Battery: 2-6S Lipoly / 5-18s NiXX
BEC: 5.5v / 4A
Motor Type: Sensorless Brushless
Size: 45 x 30 x 17mm
Weight: 36g
Programming Functions:
Battery Type: Lipo /NiXX
Brake: On / Off
Voltage Protection: Low / Mid / High
Protection mode: Reduce power / Cut off power
Timing: Low / Medium / High
Startup: Fast / Normal / Soft
PWM Frequency: 8k / 16k
Helicopter mode: Off / 5sec / 15sec (Start up delay)
FC 28-05 Brushless Outrunner 2840Kv
Tiny but mighty!
We introduce to you our new CF range of outrunners.
Over the coming weeks as development finishes we will be stocking more variety, turns, sizes and styles of these outrunners. All at crazy low prices.
Be sure to sign up for our newsletter and we will let you know the moment the new models are released.
Spec ;
Weight: 26g (with wire & sticker etc)
Shaft: 3mm
Motor Length: 37mm
Diameter: 28mm
Stator Size: 22x5mm
Suggested prop: 5~6inch
Voltage: 7.4v (2S)
Kv: 2840RPM/V
Data ;
Prop (APC) 6x4
RPM 13000,
MAX current (<60d) 12A
Thrust 413g(0.91lb)
Prop (APC) 7x4
RPM 9900,
MAX current (<60d) 14.4A
Thrust 381g(0.84lb)
Hobbyking KK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA
The next evolution of the rotor revolution is here!! The KK-mini is packing all the same power, but with a new mighty-mini form factor.
The KK-Mini is the next Big/Small evolution of the first generation KK flight control boards. The KK-Mini is based on the KK2.1.5 architecture and has all the same inputs and outputs as well as the full functionality of its big brother. The new 36mm designed was adapted to fit the needs of the new mini market, but don’t let its size fool you as it's just as much at home in any size multi-rotor. The KK mini still utilizes a built in GUI using a hi-res mini LCD and 4 micro buttons for the same great KK experience. It was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts.
A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts!
The original KK gyro system has been updated to an incredibly sensitive 6050 MPU system, making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK-Mini is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional polarity protected header has been added for voltage detection, so no need for on-board soldering. A handy piezo buzzer is also included for audio warning when activating and deactivating the board.
The KK-Mini added polarity protection to the voltage sense header and on-board buzzer. The voltage sense line has been updated for better accuracy.
If you’re new to multi-rotor flight or have been unsure about how to setup a KK board, then the KK-Mini was built for you. The 6 Pin USBasp AVR programming interface ensures future software updates will be quick and easy.
Featured
Landing gear set. Shock Absorbing
Landing gear set comes completely built, suspension travel is around 15mm.
Front steering wheel height : 150mm
Side gear height: 120mm
Turnigy Park250 Brushless Outrunner 2200kv
Designed to provide reliable and clean power for 3D parkflyers. Turnigy EasyMatch Park250 brushless outrunner will provide more power and with its high efficiency, long run times.
A quality motor, built specifically for planes designed to fly with a 50 watts brushless outrunner.
Eco Micro Servo 1.5kg / 0.10sec / 10.1g
Spec.
Dimension: 23x12.2x29mm
Torque: 1.5kg/cm (4.8V)
Operating speed: 0.12sec/60 degree 0.10sec/60 degree(6.0V)
Operating voltage: 4.8V-6V
Gears: Plastic
Type: Analog
Motor: Brushed
Spline: 20
Temperature range: 0-55C
Dead band-width: 7us
Lead Length: 260mm
Important.
The TG9e does not have the same strength and longevity as the HXT900.
Please ensure your control surfaces are bind-free and always check servos after a hard landing or crash!
Gens ace 4000mAh 14.8V 25C 4S1P Lipo Battery Pack
Spec.
- Product Type:lipo battery pack
- Capacity: 4000mAh
- Voltage: 14.8V
- Max Continuous Discharge: 25C (100A)
- Max Burst Discharge: 50C (200A)
- Weight:: 435g
- Dimensions: 135.84*41.38*35.91 mm
- Balance Plug: JST-XH
- Discharge Plug: 4.0 banana
- Charge Rate: 1-3C Recommended, 5C Max
Gens ace lipo 4000mah 4s1p 25C/50C battery Suited to the following models: 50E、110E,70mm edf F16,Habu, Funjet etc.
1. Matched strictly by the lowest internal resistance/ capacity/ and voltage for maximum power and cycle life.
2. Standard JST/XH Balance Plug
3. Easily monitor the condition of the battery
4. Provide greater speed and longer runtimes
5. 5C fast charge capable
Polyester Velcro Peel-n-stick (Black)
Specs: Length: 1000mm Wide: 75mm Material: 100% Polyester / 0% Cotton *Note* Not the same as soft cotton based velcro usually found in clothing
20cm Futaba 26AWG Straight Extension Lead M to F 5pcs
20cm Futaba 26AWG Straight Extension Lead M to F 5pcs High quality wire, perfect for multi-rotors or other projects where
15cm Male 22AWG Twisted (10pcs/bag)
Twisted servo wire w/ connector
Wire guage: 22AWG
Good for heavy applications.
Turnigy Aerodrive SK3 – 6364-190KV Brushless Outrunner Motor
Turnigy SK3 Motors are the next leap forward in motor quality and design. We instructed the engineers to source the best quality magnets, bearings and materials available to them and develop a motor that would not only rival but surpasses the quality of many leading motor manufacturers on the market today.
The result is an efficient, high caliber motor using quality double shielded bearings, sintered Neodymium magnets and a string wound stator ensuring an accurate and consistent winding each and every time.
The Turnigy SK3 motors are suited to modelers who are seeking a quality brushless motor without compromise.
Specs.
Turns: 18T
Voltage: 10S Lipoly
RPM/V: 190KV
Internal resistance: 0.028 Ohm
Max Loading: 65A
Max Power: 2450W
Shaft Dia: 8.0mm
Bolt holes: 32mm
Bolt thread: M4
Weight: 697g
Motor Plug: 4mm Bullet Connector
Hobbyking SS Series 40-50A ESC (Opto only)
Weight: 39g
Cells: 2-4S
Max Current: 40A
Burst: 50A
BEC: None (Opto Only)
User Programming options:
Battery setting
Throttle Range Brake setting 4
options: Direction and Cutoff Type
Timing Mode Setting: 1 / 7 / 15 / 30
PWM setting: 8K/16K
Turnigy 5000mAh 3S 20C Lipo Pack w/XT-60
Specs:
Minimum Capacity: 5000mAh
Configuration: 3S1P / 11.1v / 3Cell
Constant Discharge: 20C
Peak Discharge (10sec): 30C
Pack Weight: 360g
Pack Size: 143 x 51 x 23mm
Charge Plug: JST-XH
Discharge Plug: XT60
Vibration Damping Ball (65g) (Bag of 8)
Specs:
Isolation rating: 65g per ball
weight: 0.5g per ball
Size: 12.7mm tall (top of flange to bottom of flange) 8mm wide (at widest point)
Mounting: 5mm hole or bolt threw (8mm height between flats)
Included:
Bag of 8 balls (65gram)
Super Light Hinges 26x20x.5mm (10pcs)
Super Light Hinges 26x20x.5mm (10pcs)
Deals
1/10 HobbyKing® Mission-D 4WD GTR Drift Car (ARR)
The Mission-D 4WD Drift Car is without a doubt the best value in R/C drift cars on the market today! Being an ARR (Almost Ready to Run) model, the car is fully assembled and setup right out of the box. You will simply need to add your own radio system (2CH transmitter & receiver) and 2S 7.4V lipoly battery to be ready to drift!
This chassis features a belt driven 4WD system which is very efficient, low maintenance and really puts the power down to all four wheels. A modified 22T brushed motor and ESC provides plenty of wheel spinning torque while keeping the current draw very low. The chassis utilizes ball bearings throughout, no old-school bushings here. This makes for super smooth and efficient operation.
The Mission-D's suspension is fully adjustable. The shocks are oil filled and constructed from durable yet lightweight aluminium. You can adjust the shock mounting position, camber/castor (front) and camber (rear). An adjustable ball differential is installed up front with a locked rear axle at the back. All of this, combined with the well thought out electronics mounting and battery placement makes this chassis so well balanced that even a complete newbie can be drifting like a pro in no-time!
Proper hard compound, scale treaded drift tires come pre-installed on 3mm offset racing wheels. The wheel hubs feature a brake rotor and caliper providing the ultimate in scale looks. The body shell comes pre-painted and trimmed, you will simple need to install the wing of your choice (two optional wings included).
10CM Servo Lead Extention (JR) 26AWG(10pcs/bag)
10CM Servo Lead Extention (JR)Quality connectors and silicon wire used.
120A Sensored Brushless Speed Controller
Specification Color: As shown Item type: brushless speed controller 120A continuous current, transient current 760A support the 2-4 lithium battery
